Hydraulic machine on the table, buy a table of hydraulic machines, table hydraulic press where the table hydraulic machine prices, table hydraulic machine manufacturers 

 Features: 

 1, using the jog and semi-automatic control mode, according to the process requires optional timed or scheduled process control; 

 2, two-button switch mode of operation, the demand for pressure and stroke can be adjusted at any time; 

 3 According to need to install electro-optical protection device, flexible operation, safe and reliable; 

 4, equipped with the 780MM dedicated rack, easy to operate; 

 C-type hydraulic machine safety operation: 
 A. The operator be familiar with the general properties and structure of the hydraulic press to prohibit the use of overload; 
 Two. Before use, in accordance with the provisions of lubricating oil, check the high-pressure pump, pressure gauge, a variety of valves, seals, etc. is normal; 
 3. Before starting to check the mold supporting material weight to meet the requirements, said the material tool is accurate; 
 4. Touch with oppression must be placed in the position of the plate center, ban eccentric use. Each class before starting the pressure test should be checked once mold is a split loss and abnormal; 
 5 Double operation, set the hand to boot, mutual coordination and cooperation; 
 6. Hands, head placed between the mold and the pressure head is strictly prohibited; 
 7. Work is completed, will pressure products, tools, dies in order and placed in the designated place. 

 C-type hydraulic machine operating system: 
 Operator to have appropriate qualifications, must be certified, is strictly prohibited personnel open the machine do not understand the use of hydraulic machine; 
 Two classes should wear good provisions, supplies and labor protection; 
 3, before starting the examination preparation: photoelectric protection device is reliable, the trip switch is sensitive, the fasteners are loose; 
 4, before starting to remove the debris on work surfaces and mold, to adjust the working pressure, slide stroke, empty running one to two minutes, everything is normal before work; 
 5, the adjustment handle on the machine have been adjusted at the factory fit, non-commissioning can not be arbitrarily adjusted. 


 Scope of application: 

 Table C-type hydraulic press for press-fit of the parts, parts of the correction and riveting; also applies to the plastic material forming the sheet metal blanking, stretching, stamping and plastic, powder products and other uses; 
 Hydraulic machine on the table, buy a table of hydraulic machines, table hydraulic press where the table hydraulic machine price table hydraulic machine manufacturers - Shenzhen Xin Gou, the strength of enterprises, quality assurance